公司名称:贵州林达机电设备有限公司
电 话:0851—84123149
传 真:0851—84123149
手 机:13037855222
联 系 人:张经理
网 址:www.lindajd.com
地 址:贵州省贵阳市观山湖区西二环235号贵阳北站片区北大资源项目第3A01-3A03,3S01号楼(A01)1单元7层18号
What are the basic requirements for the maintenance of the Guiyang elevator repair factory?
1.电梯的安全保护装置必须灵活可当安全保护装置失效时,电梯应不能投入正常使用。
1. the safety protection device of the elevator must be flexible, when the safety protection device fails, the elevator should not be put into normal use.
2.电梯的各种部件与安全装置以及机房、井道、底坑应保持清洁,部件及安全装置不应锈蚀。
2. the various parts and safety devices of the elevator and the machine room, the well track and the bottom pit should be kept clean, and the parts and safety devices should not be corroded.
3.运转与活动部位的零部件应保持润滑良好,无卡阻现象,减速箱内与润滑装置内应有足够的油量。润滑油必须符合电梯制造厂的要求。
3. the parts of the operating and active parts should be well lubricated, and there is no hindrance. There should be enough oil in the deceleration box and in the lubricating device. The lubricating oil must meet the requirements of the elevator manufacturing plant.
4.各部件和部件之间的连接紧固件应牢固可无松动现象。
4. the connecting fasteners between parts and parts should be firmly without loosening.
5.各部件与装置以及开关、元器件上的罩壳、盖板、零件、紧固件等应完整齐全。
5. the parts and devices, the cover shells, cover plates, parts and fasteners on the switches and components should be complete and complete.
6.电梯的各种显示应正确,完好无损。
6. the various display of the elevator should be correct and intact.